Maritime is representing FAB Dock in North America. FAB Dock is a brilliant Water Level Dry Docking system.


This System prevents growth on your boat's bottom and corrosion to your running gear. Makes docking easier and saves Marriages! Just drive your boat into the FAB Dock and secure the lines like you normally would. The inflatable outer tubes act as permanent fenders always at your dock. No moving part to service or break like traditional boat lifts. Keeps your boat as dry as if it was out of the water but with the convenience of being right at the dock ready to go. Fantastic product, well thought out and Super construction. Plus it is portable, just deflate and take it with you. No pilings to drive, simple installation.


FAB Dock and Maritime are please to tell their boating friends that there is a better way to take care of your boat.



Click here for Fab Dock Information Request Form




FAB Docks come in a universal range designed for mono hull outboard and stern drive boats from 18 to 44 feet and up to 13 feet wide. Shaft and rudder boats, pod drives, and multihulls can also be accommodated with custom built models. FAB Docks are constructed from the best components in the world and heat welded to exact standards.


A FAB Dock means that you never bottom paint your boat again. The cost and environmental benefits are enormous.



Key Benefits

Patented Water Sensing Module The FAB Dock pumping system is controlled by a revolutionary, patented water sensing module that constantly monitors your FAB Dock for any signs of water. This little piece of genius, called the FAB Dock IQ, will go as far as telling you the voltage of your battery and the power draw of your FAB Dock pumps, as well as diagnose an issue if your pumps stop working.
12 Volt Power Using the FAB Dock controller each system is operated by 12 volt power from your boat’s battery, eliminating the need to have 240/110 volt wires running through the water.
Solar Power FAB Dock systems have the advantage of being able to be run off solar power.
Transportable Solution Moving home or marina berth? FAB Dock systems are portable –  just roll it up and take it with you.
Environmentally Friendly You will be helping the environment by reducing the amount of toxic anti-foul in the water.
Cost Effective You will save money on maintenance by keeping your boat’s legs, shafts and propellers dry. FAB Dock also keeps water out of inlet pipes preventing sea growth and other build up in these vital channels. In addition, your boat will go faster providing better fuel efficiency. These savings combined means your FAB Dock could pay for itself within a couple of years and could improve the resale value of your boat.
Stress-Free Boating The unique design makes docking your boat so much easier, taking the stress out of boating.
Shallow Water No issue in shallow waters – if you can get your boat in and out, a FAB Dock can be installed.
Compact & Safe FAB Dock is self-contained with no bulky or hazardous control boxes and pipes to trip over.  Plus, with no hard plastic or metal parts to damage your boat, FAB Dock offers peace of mind. FAB Dock’s low profile design means your boat remains at water level, so there’s no chance of your boat rolling over or your views being blocked.
Easy Maintenance Your FAB Dock has no metal parts to corrode or moving parts to service making maintenance easy or, for a small fee, we can arrange a six or twelve month cleaning service.


Click here for Fab Dock Information Request Form



7 Maplewood Street, Mattapoisett, MA 02739
TEL: 508-758-9409 | EMAIL: boattransport@comcast.net
© Maritime - Boat Transporation and Marina & Boatyard Equipment. All Rights Reserved.